Monday, September 19, 2011

craft project: mosaic angel

The mosaic angel my children gave
their grandmother for Christmas.
Brief Description: My children made this mosaic angel for their grandmother one Christmas long ago. It still hangs in her garden room watching over her African violet collection.

Supply List:
  • Selection of mosaic tiles, glass marbles, tiny mirrors, seashells
  • Cement grout
  • Elmer’s wood glue
  • Plastic-like gloves
  • Old damp rags, paper towels, sponge
  • Sturdy prefabricated paper mache angel form
  • Bucket of clean water
Directions:
  1. First you will glue your tiles directly to the surface of the prefabricated angel with Elmer's wood glue.
  2. Let the applied tiles dry over night to ensure that the glue has hardened. Do not check to see if the glued tiles have stuck to the surface permanently. Some of them will, some of them may only seem temporarily attached. The application of this step is necessary to help the tiles to stay in place before grouting them only.
  3. Mix the grout solution according to the directions on the label.
  4. Wear gloves if the label says that it is necessary.
  5. Gingerly apply the grout directly onto the surface of the tile work. Make sure that the grout does get pushed into as many of the cracks as possible. This is a bit messy.
  6. Wash your gloves thoroughly and you may put them back on or choose to remove them all together at this point. Be cautious about this removal however, some people do have mild skin allergies to grout and will develop a rash when coming in direct contact with it when its wet.
  7. Now your going to delicately wipe down the surface of your tiles with a damp rag or paper towel. You will be throwing these towels away. If you wish to rinse and squeeze out a sponge or towels as you work, keep an old bucket full of water for this procedure. Do not wash this contaminated water down a sink! Grout will collect in pipes and harden. You will need to pour this old water down a sewer pipe outside or simply find an area of your yard where you may dispose of it. Grout won't hurt an old leaf pile or the ground where plants are not growing.
  8. You want your project to look clean on the surface of the tiles when you are finished. The cracks between the tiles should also be completely filled with grout.
  9. Leave your mosaic project out over night to harden properly.
  10. If you see remaining grout on the surface of your tiles after it has hardened, you may go over the surface of these tiles with a light weight sand paper and damp sponge again.
Additional Suggestions: The color of grout you choose to use with this project will also make a big difference in it's appearance so think about it awhile before beginning.


All instructions and photographs, templates are copyrighted by Grimm 2017

No comments:

Post a Comment