sew a ethnic inspired wool pillow

Pillows made from woolen mats are easy
and quick crafts that just about anybody
can produce.

Brief Description: A woven mat, from south of the boarder, sewn into a pillow, adds plenty of character to my old mission furniture.

Supply List:

• one woven mat
• embroidery floss
• cotton stuffing
• a woolen piece of fabric for the backing of the pillow
• scissors

Directions:

1. Cut the woolen fabric to the exact same size of the woven mat.
2. Pin the two fabric pieces together.
3. Blanket stitch around three sides.
4. Stuff the pillow with cotton filler.
5. Sew the remaining side shut with the same blanket stitch.

All instructions and photographs copyrighted by Grimm 2011

children can sew this miniature penny rug

Sample of a miniature penny rug.

Brief Description: This miniature sampler of a "penny" rug provides young sewers opportunity to practice their embroidery skills. 

Supply List:

• 4 felt squares from a hobby shop or scrap woolens (4 colors minimum)
• penny "templates" (below)
• contrasting embroidery floss, three colors
• embroidery needle
• scissors
• pins
• black permanent ink marker

Directions:

1. Print and cut out the penny template provided below.
2. Draw around the circle templates with a permanent ink pen after placing these on top of your felt or woolen scrapes.
3. Cut out your penny design and pin it down onto a rectangular felt or woolen shape according to your own tastes.
4. Use a blanket stitch to assemble the sample penny rug.

Additional Suggestions: Use all wool or all felt scraps for your project. Once you have mastered the technique, design a larger version to cover a tabletop or bedroom dresser.

Template for a variety of "penny" shapes.
This template may be downloaded and sized in a
word document. Read the Terms of Use before
using it folks.

All patterns and photographs by Grimm copyrighted 2011.

Felt ball rugs are so easy to make,
 even a child could assemble them.

stitch some felt coasters to protect your furniture

A sample of the snowflake design was
used to craft the felt coaster above.
(approx. diameter across, 3 1/2 inches)

Brief Description: Felt coasters make wonderful little, inexpensive gifts. Children may practice their sewing and cutting skills while producing a set for a parent or grandparent. 

• Supply List:
•    1. At least two contrasting colors of felt or a grab bag of felt scraps will due.
•    2. Sharp scissors
•    3. No sew if you prefer (I did not use it, but it can make this endeavor much easier. You will need an iron too if you go this route.)
•    4. Embroidery threads of matching or contrasting color.
•    5. Coaster templates
•    6. Black permanent ink marker or a very soft lead pencil

Directions:

1. Print and cut out the felt coaster templates provided below.
2. Trace around all of the details of the template on top of the colored felt you have chosen for the top part of the coaster. Children may prefer to use the permanent ink pen for this part of the process. It is easier to see on dark felt.
3. Then place your circular felt top onto a contrasting felt and use it as a template to cut two additional felt circles that will become the bottom half of the coaster.
4. Set aside the third blank felt piece for later.
5. Sew with straight stitches the fancy top to one of the back sides with a pleasing design. Children find it easiest to follow the outlines of the pattern. Remember to knot and backstitch in order to keep your work from unraveling.
6. Place the third felt circle on top of the first back side and either whip stitch the three felt circles together or use a blanket stitch, if you prefer. This third piece of felt will hide all of your knots!

Additional Suggestions: Some people may elect to craft this project with "No Sew."  Read and follow the directions given on the packaging of the "No Sew" instead of stitching the coaster together by hand.

Diamond design template by Grimm for a felt coaster.

Cross and fish design template by Grimm for a felt coaster.

Mum design template by Grimm for a felt coaster.

Snowflake design template by Grimm for a felt coaster.

A wheel and spoke design by Grimm for a felt coaster.
All of these templates may be downloaded and sized in a
word document to fit the above measurements.
Read the Terms of Use before using it folks.

All patterns and photographs by Grimm copyrighted 2017.

Assemble an embroidered bouquet wrap

You may wish to hang this bouquet
by a vintage dressing table.

Brief Description: I think this is a lovely way to give a simple bouquet of flowers. Baby's breath and red roses would look delightful tucked inside of this embroidered wrap. I used tissue paper flowers for the photograph because these were what I had at hand. Make something new out of something old. 

Supply List:

• embroidered pot holder
• embroidery floss, I used red
• embroidery needle
• scissors

Directions: 

1. Turn the pot holder face down and fold together two of it's opposite points to create the cone shape. Pin down the sides if necessary.
2. Thread your embroidery needle as thickly as you wish and stitch these two side together with a firm decorative stitch. 
3. Stuff the cone shaped wrap with a posy and give it to your sweetheart or friend.

Additional Suggestions: For those of you who still celebrate May Day, this little project would be quiet charming. There are so many of these little embroidered pot holders for sale in antique malls and flee markets for mere pocket change.

The cone shape allows for a charming little
package for rose buds and baby's breath.

An old-fashioned pot holder I picked up in a local antique shop.

All patterns and photographs by Grimm copyrighted 2011.

upcycle your old sweater into a throw pillow

My hand knit sweater looks much better as a pillow!

Brief Description: Ever wonder what you could possible do with old 80s sweaters? Yes, I understand that some things should never be resurrected but, this one had never even been worn. Hard to believe, isn't it?

Supply List:

• old sweaters in excellent condition
• large embroidery needle
• matching embroidery floss
• stuffing inside of a pillow form or cushion material cut to size.

Directions:

1. Cut the sweater approximately 1/8 inch larger than the measurement of your pillow.
2. You will need two identical sides and these may be sewn together to either hide the seam or not, depending on the look that is most appropriate for the sweater's surface.
3. The pictured knit pillow was sewn with the right sides facing out. I sewed the seams twice with a heavy blanket stitch. I find this necessary when working with something that was formerly knit. 
4. Attempt to catch every loop of the knitting with the embroidery floss, otherwise your pillow will unravel.
5. Stuff the pillow with the pillow form, not loose cotton batting. Loose batting will eventually get pulled out from in between the knitting!

Additional Suggestions: A heavily textured knit looks best when sewn together with a similar seam.  For a finer seam, it would be best to stitch the knitted pieces on a sewing machine in order to prevent unraveling.

photographs and written craft pages copyrighted by Grimm 2017 

Upcycle old sweaters into handbags with Craftbrulee.
In England, sweaters are called jumpers. 

wrap and tie a prairie yarn doll

Brief Description: These kinds of rag dolls were made by American settlers. They have an old-fashioned charm. My daughter took this one as soon as it was photographed.

Supply List: 

• One skein of yarn if it is bulky and soft
• scissors
• small piece of cardboard
• scrap fabrics and lace trims
• needle and thread that matches the yarn

Directions:

Twist the yarn around a notched piece
cardboard, first one way, then another.

Soon you will have made a tight ball
the size of my doll's head, approximately
one inch in diameter. This solid
ball will add weight and substance to
the doll. I want this doll to stand
up to a three to five year old's rough play.

Use a large book to twist the yarn around
repetitively (about 35 times) until
there is enough yarn to create a full
body with. My book measured
approximately eleven inches long.

After removing the yarn from the book carefully
tuck the ball of yarn beneath it. Pull the yarn
over the "head" and tie around the bottom with more yarn
to create the neck. Then thread a long needle
with matching thread and sew in and out of the head.
The thread should disappear into the yard but
if you continue to do this the doll's
head will become firm and compact.

Run your fingers through the yarn body and
clip the looped bottom apart. Gather up the
yarn ends and trim these ends off evenly.

You will need to repeat the third step above
(about 17 times).Tie off the yarn edges.
Braid the yarn to create the arms.
The braid is shown above
along with the yarn doll body. Divide
the doll's body in two even sections
and then position the arms between the sections.

Wrap more yarn around the doll body
to create a waste just below the doll's arms.
Thread a needle and sew in and out of the
waste, the wrist joints, and arms of the doll.
Sewing ensures these ties are firm and will
stand up to rough play.

Now you are ready to dress your prairie doll.
I gathered and sewed onto the body a skirt.

I added a lace shawl and mop cap.

Additional Suggestions: Yarn dolls are dressed in a variety of ways. Scarecrows and clowns are popular costume choices. Some crafts people prefer just to leave them without clothing as well.

photographs and written craft pages copyrighted by Grimm 2011 

Want something more contemporary? 
SoCraftastic makes a octopus doll from yarn.

applique a pillow with wool hearts

Applique woolen pillows that
I created for my family room.

Brief Description: I hand-appliqued these pillows from old woolen trousers. I hate to toss expensive wool out when I can recycle it in a quilt, table runner etc... Wool is very durable and keeps it's shape longer than any other fabric. For this  reason, I prefer to use it in decorative pillows that I know my family will be using roughly for many years.

Supply List:

• wool scraps, if you purchase these, I would suggest no less than 14 inches of five different patterns/solids.
• embroidery floss in a variety of contrasting colors
• scissors
• the templates below, printed and cut out
• embroidery needles
• soft cotton filler of your own choosing

Directions:

1. Cut out the templates as directed.
2. Cut out six hearts for the pillow depicted at the front of the photograph. The hearts are hand-sewn with a blanket stitch on top of 6 inch by 5 1/2 inch rectangles. There are three rectangles across and two rectangles from top to bottom. 
3. Reserve approximately 16 1/2 inches by 13 inches of one woolen swatch for the back of this pillow. 
4. Stitch these pieces together and stuff.
5. For the folk star pillow, cut four stars, four lager penny circles and four small penny circles. Applique these pieces together as they appear in the photo. 
6. You will need four, 8 inch by 8 inch squares for each star pattern and four additional squares for the back side of the pillow.

Would you like to try sewing some for yourself?
Here are my free templates for the pillows pictured.
This template may be downloaded and sized in a
word document to fit the above measurements.
Read the Terms of Use before using it folks.

photographs and written craft pages copyrighted by Grimm 2011 

Penny rugs or Coin rugs

assemble a half mask for a masquerade

A close view of the half mask.

Brief Description: I made this mask for my younger teen one year for a party. These kinds of half masks are very easy to assemble if you've got a glue gun.

Supply List:

• one prefabricated half mask
• two small bags of silk flowers
• one prefabricated glittery peacock
• approx. five yards of satin ribbon
• two yards of contrasting ribbon
• one long sturdy dowel rod measuring approximately 15 inches

Directions:

1.  Wrap approximately two yards of the larger quantity of satin ribbon around the dowel rod. Apply very tiny drops of hot glue to the back side of the dowel rod as you wrap.
2.  Hot glue a small portion of the larger quantity of satin ribbon around the half mask.
3.  Hot glue into a pleasing arrangement, the tiny silk flowers.
4.  Hot glue the glittery peacock onto the right side of the mask if the lady is right handed, to the left if the lady is left handed.
5.  Hot glue the dowel rod to the back side of the half mask so that the top of the dowel rod does not show above the mask.
6.  Hot glue the remaining ribbons to the back side of the dowel

Additional Suggestions: Work as neatly as you can: the aesthetic appeal of such a project depends upon the careful attachment of the elements.

The full length view of our masquerade mask.

photographs and written craft pages copyrighted by Grimm 2017

Craft More Masks:

• Kids Crafts: Superhero Masks and Template
• Fun Family Crafts: Masks
• Craft A Simple Butterfly Mask 
  

wrap a bottle to create an interesting vase

Close up view of the surface of my vase.
Different textured yarns lend unusual interest to the project.

Brief Description: This project takes patience but the end results are definitely groovy! It is also a good way to use up old yarns that have been tossed around in storage forever.

Supply List:

• lots of yarn of any size, shape or color
• white glue
• old discarded plastic bottles
• scissors

Directions:

1. Start by adding a generous bead of glue to the base of a washed and dried plastic bottle.
2. Wrap the first layer of yarn on top of this bead of glue.
3. Then add a second layer of glue and continue wrapping yarn on top of the glue. 

Additional Suggestions: The key to getting excellent results in this project is patience! The first two rows of yarn will seem slippery but, once the glue becomes tacky, the rest of the following rows will apply easily. Don't forget to add a felt bottom to your bottle's vase to prevent scratching the surface of tables.

A finished yarn wrapped vase.

photographs and written craft pages copyrighted by Grimm 2017

More links to yarn crafts:

• Yarn Octopus
• Yarn Stars for Christmas
• Craft a Yarn Wrapped Star
• Yarn Butterflies
• Yarn Coaster Craft Kit 
• Create a Yarn Butterfly Picture